Applications - ADM Series

Videos

• Dotting
• Encapsulation/ Glob Top
• Underfill
• Selective Conformal Coating

User Application Programming (UAP –ADM v3.0)
> Main Routine
> Sub Routine
> Standard Dispensing Routine
> Motion Limit
UAP -ADM is built-in with ADM.exe as a user friendly programming tool to allow
dispensing profile to be generated through PC remote mode.

"Standard Dispensing Routine" is designed to provide “Step by Step” guide to
make dispensing programming even easier.
> Dot Matrix Routine (Default)
> Continuous Path Routine (Default)
> Customised Routine (Base on customer requirement)

Customised User Vision Routine (uVR) can be integrated into UAP, to allow user to
create specific target/ inspect vision routine.

 

1. Dotting Dispense
   • Applicable Material: Solder/ Silver Paste, Glue, Gel, Flux etc
   • Applicable Micro-Valve: On/ Off Valve, Metering Valve, Piston Valve, Rotary Valve, Non-Contact Valve
     


2. Continuous Path Dispense
   
   • Applicable Material: Glue, Gel, Sealant etc
   • Applicable Micro-Valve: On/ Off Valve, Metering Valve, Rotary Valve, Non-Contact Valve


3. Encapsulation/ Glob Top Dispense
   • Applicable Material: Encap Material
   • Applicable Micro-Valve: On/ Off Valve, Metering Valve, Rotary Valve
     


4. Underfill Dispense
   
   • Applicable Material: Underfill Material
   • Applicable Micro-Valve: PistonValve, Metering Valve, Rotary Valve, Non-Contact Valve
     


5. Two Part Mix Dispense
   • For potting, bulk fill etc
   • Applicable Material: 2 Part Materials
   • Applicable Micro-Valve: 2 Part Static Mixing/ Mini-Mixing Valve


6. Selective Conformal Coating
   • For selective spray coating with soft landing spray valve/ needle valve
   • Applicable Material: Conformal coat Materials
     
     
7. Cavity Fill/ Potting/ Dam & Fill
   
8. Others

Beside above mentioned processes & applications, ETuan can also offer other dispensing process solution to meet our customer requirement.